Please check or eBay store: www.reprapdiscount.com
[HK+INTL] GT2 open belt, Taurino Power, MK2B Dual Power, GT2 pulleys, HDT pulleys, MXL pulleys, ORD Bot Parts (no replies)
↧
↧
Couplings 5_8 are in stock @ $5.99 (no replies)
Hi Everybody !
We have a stock of couplings 5_8 .
Price :- $ 5.99 USD.for more info visit here
for sales or inquiry support@makemendel.com
Thank you !
We have a stock of couplings 5_8 .
Price :- $ 5.99 USD.for more info visit here
for sales or inquiry support@makemendel.com
Thank you !
↧
Supply3DPLA announcement! (no replies)
↧
Full Prusa Mendel i2 DIY kit (no replies)
Hello,
I'm selling some Prusa Mendle i2 DIY kits
The only things you need to buy are: power supply, threaded and smooth rods
the kit includes
Ramps 1.4
Jhead Hotend
MK2 heatbed
5 nema17 motoren
High quality printed parts
Hobbed bolt
Alu Nateplate
Alu hotend holder
Resistor
100k Thermistor
MXL Belts
Alu MXL pulleys
LM8UU Bearing
608 Bearing
This for a price of 465,79 incl VAT and excl shipping.
If you have more questions let me know!
I'm selling some Prusa Mendle i2 DIY kits
The only things you need to buy are: power supply, threaded and smooth rods
the kit includes
Ramps 1.4
Jhead Hotend
MK2 heatbed
5 nema17 motoren
High quality printed parts
Hobbed bolt
Alu Nateplate
Alu hotend holder
Resistor
100k Thermistor
MXL Belts
Alu MXL pulleys
LM8UU Bearing
608 Bearing
This for a price of 465,79 incl VAT and excl shipping.
If you have more questions let me know!
↧
Sold at once 4 rolls 1.75 mm ABS filament (no replies)
Hi,
My name Heri from Semarang, Indonesia, I have 4 rolls 1.75 mm ABS filament, 2 has been used only to test print (purchased from Solidoodle green and blue to be purchased from 3d-printer-filament.com). I am attaching the photos, that have been used from Solidoodle (Figure 1) and is of the 3d-printer-filament.com (figure 2).
And this to 2 other rolls that still have never used (Fig. 3), printing test results (Figure 4), the top is 1.75 mm PLA (from 3d-printer-filament.com) which I now use. I'm selling because heat heat-bed takes a long time if using ABS filament.
All 4 rolls once it is sold at a price of 120 USD or 30 USD / roll, plus shipping.
Thank you for the attention of all of you.
Regards,
Heri
herisuprapto15@gmail.com
My name Heri from Semarang, Indonesia, I have 4 rolls 1.75 mm ABS filament, 2 has been used only to test print (purchased from Solidoodle green and blue to be purchased from 3d-printer-filament.com). I am attaching the photos, that have been used from Solidoodle (Figure 1) and is of the 3d-printer-filament.com (figure 2).
And this to 2 other rolls that still have never used (Fig. 3), printing test results (Figure 4), the top is 1.75 mm PLA (from 3d-printer-filament.com) which I now use. I'm selling because heat heat-bed takes a long time if using ABS filament.
All 4 rolls once it is sold at a price of 120 USD or 30 USD / roll, plus shipping.
Thank you for the attention of all of you.
Regards,
Heri
herisuprapto15@gmail.com
↧
↧
single Nema 17 Stepper Motors for sell @ $15.00 (no replies)
Welcome to all !!
We have Nema 17 Stepper motors in stock.
You can view its details Here
Find attached Specification of our motor. [attachment 12426 Motor_Specification.png]
All replies are welcome. !
Thanks for viewing !!
We have Nema 17 Stepper motors in stock.
You can view its details Here
Find attached Specification of our motor. [attachment 12426 Motor_Specification.png]
All replies are welcome. !
Thanks for viewing !!
↧
[RRW] Megatronics v2.0 available! €79.99 (1 reply)
Announcing the direct availability of Megatronics v2.0, the new version of our populair Megatronics line of Reprap Electronics. This board is the best value for money, all these features for only €79,99.
[reprapworld.com]
Major features:
Atmega2560
Powerful Atmega2560 processor with 256 kB memory, running at 16Mhz
Thermo couple (2x)
On board support for connecting two thermo couples
SD Card
Autonomous printing from Micro SD card on board
LCD support
Hooking up a LCD is pretty easy. The Wiring is compatible with most LCD screens. We do not sell the required wiring yet, but you can use 6x2-wire cable.
Five MOSFETs
The board has 4 MOSFETs (4x 25A) to support fans and extruders and 1 MOSFET (IRLS3034PBF) for the heated bed
Up to 6 stepper drivers
Compatible with RAMPS, 6 slots for stepper drivers (not included). Modularized to make replacement easy for damaged drivers. This board also support the new DRV8825 driver from Pololu [www.pololu.com].
Support for many peripherals
The board's functions can be easily extended with LCD, keypad etc. See the connectors section for more information
Check the wiki [reprap.org] for more information
[reprapworld.com]
Major features:
Atmega2560
Powerful Atmega2560 processor with 256 kB memory, running at 16Mhz
Thermo couple (2x)
On board support for connecting two thermo couples
SD Card
Autonomous printing from Micro SD card on board
LCD support
Hooking up a LCD is pretty easy. The Wiring is compatible with most LCD screens. We do not sell the required wiring yet, but you can use 6x2-wire cable.
Five MOSFETs
The board has 4 MOSFETs (4x 25A) to support fans and extruders and 1 MOSFET (IRLS3034PBF) for the heated bed
Up to 6 stepper drivers
Compatible with RAMPS, 6 slots for stepper drivers (not included). Modularized to make replacement easy for damaged drivers. This board also support the new DRV8825 driver from Pololu [www.pololu.com].
Support for many peripherals
The board's functions can be easily extended with LCD, keypad etc. See the connectors section for more information
Check the wiki [reprap.org] for more information
↧
PCB Heatbeds are in stock @ 25.99 (no replies)
Hello Everybody!
We have a stock of high Quality PCB Heatbeds.
Price:- $25.99 USD.
For more info visit here.
For sales or inquiry drop a mail at sales@makemendel.com
Thankyou !!!
We have a stock of high Quality PCB Heatbeds.
Price:- $25.99 USD.
For more info visit here.
For sales or inquiry drop a mail at sales@makemendel.com
Thankyou !!!
↧
PLA 1.75 in stock - Paris area (no replies)
Hi,
We are located in the Paris area (north west suburb, tube connected...)
Most colours are in stock for 1.75 PLA filaments. You can check for each at www.imprimante3dfrance.com
Best regards,
---------------------------------------------------
Bonjour,
Nous sommes situés tout près de Paris (banlieue nord ouest, accessible par le métro)
La plupart des couleurs sont disponibles pour les bobines de PLA en diamètre 1,75mm.
A vérifier sur www.imprimante3dfrance.com
Cordialement,
We are located in the Paris area (north west suburb, tube connected...)
Most colours are in stock for 1.75 PLA filaments. You can check for each at www.imprimante3dfrance.com
Best regards,
---------------------------------------------------
Bonjour,
Nous sommes situés tout près de Paris (banlieue nord ouest, accessible par le métro)
La plupart des couleurs sont disponibles pour les bobines de PLA en diamètre 1,75mm.
A vérifier sur www.imprimante3dfrance.com
Cordialement,
↧
↧
[USA] MatterHackers now offering Taulman 618 Nylon Filament! (no replies)
In our effort to make it easy to get all the various kinds of filament in one place, MatterHackers is now carrying Taulman 618 Nylon Filament! This filament can be used to create some of the most high strength and durable parts yet. So swing by our website and check out the specialty filaments:
www.matterhackers.com
Available in both 1.75mm and 3mm and works well on nearly all printers.
Also, stay tuned for even more colors of our PLA filament as well as additional cutting age filaments coming soon!
www.matterhackers.com
Available in both 1.75mm and 3mm and works well on nearly all printers.
Also, stay tuned for even more colors of our PLA filament as well as additional cutting age filaments coming soon!
↧
Amazing RapidBotMega 3D Printer(:D (no replies)
Hi Everyone,
Greetings!!
We are manufacturing new RapidBotMega Printer.
![]()
![]()
![]()
![]()
Please note below best features of RapidBotMega:
1) Improved Z axis
2) Improved Design which gives neat and clean look to the machine
3) ATX power supply and Printrboard is placed at the bottom to avoid much wiring.
4) Large Build Size : 750x250x200 mm.
5) Compact design
6) Mechanically more stable machine.
7) Improved Printbed Adjustment.
For more information click here
Thanks in advance!!
Greetings!!
We are manufacturing new RapidBotMega Printer.
Please note below best features of RapidBotMega:
1) Improved Z axis
2) Improved Design which gives neat and clean look to the machine
3) ATX power supply and Printrboard is placed at the bottom to avoid much wiring.
4) Large Build Size : 750x250x200 mm.
5) Compact design
6) Mechanically more stable machine.
7) Improved Printbed Adjustment.
For more information click here
Thanks in advance!!
↧
[India] High Quality PCB HeatBed (no replies)
Hello Everyone!!
We manufacture high quality PCB HeatBed. If you need custom PCB
HeatBed for your 3DKit, then let us know. We can make it for you.
PCB Heat Bed of Dimension 21.5 cm X 21.5 cm , width 2 mm.
Special Price : $ 25.99 USD
![]()
For more information Click Here.
Thank you,
We manufacture high quality PCB HeatBed. If you need custom PCB
HeatBed for your 3DKit, then let us know. We can make it for you.
PCB Heat Bed of Dimension 21.5 cm X 21.5 cm , width 2 mm.
Special Price : $ 25.99 USD
For more information Click Here.
Thank you,
↧
[Germany | EU] MendelMax Kit (no replies)
I want to sell my (complete?) MendelMax Kit. I search the BOM and listing of the following sites (some are in german) and ordered the parts from different places a few months back. But unfortunately I don't have the time to complete this project with all the things I have to learn with trial and error. As far as I can judge there is nothing missing to build a MendelMax (except maybe the springs for the heated bed and some screws&nuts). But since I never build a 3d printer I can't give you a guarantee that nothing else is missing. There is also a LCD & SDCard Reader included in this package which are not necessary for a mendelmax build.
[brillenflieger.de]
[wir-bauen-einen-3d-drucker.de]
[mendelmax.com]
[techpaladin.com]
Wade Extruder 3mm 9/47 (komplett) I bought from [reprap-fab.org] with 0,5 und 0,35 nozzle
[attachment 12623 01-wadeextruder.jpg]
Plastic set for MendelMax with lower motor mount and RJMP-01-08, also from [reprap-fab.org]
2x tooth belt T5 with Kevlar (90cm X; 120cm Y)
2x Aluminium Pulleys T5/10.
5x ball bearing 608ZZ
12x IGUS RJMP -01-08
[attachment 12624 02-mendelmax-kit.jpg]
1x Mega2560 board rev.3 (100% Arduino-compatible) The mega2560 board is not flashed with any firmware since i don't know which firmware you like to use with it.
1x ramps 1.4
5x A4988 stepper driver
5x heat sink
5x conductive sticker (aluminum)
3x mechanical endstops
1x smart LCD Controller
1x smart adaptor
1x MK2A PCB (still wrapped on the picture)
1x SD Ramps
1x 4GB SD card (genuine Sandisk)
1x 100K ohm EPCOS thermistors
2x cable 50 cm
1x ceramic screwdriver
5x 4 pin cables (motor)
2x 2 pin cables (temperature)
3x 3 pin cables (endstop)
1x 2 pin cables
Single Solid State Relay SSR DC-DC 25A 3-32VDC/5-220VDC
[attachment 12625 03-elektronic.jpg]
5x Nema 17 Stepper motors
[attachment 12626 04-nema17motor.jpg]
240Watt ( 12V/20A ) PSU
[attachment 12627 05-psu.jpg]
4x extrusion 20x20 I-Typ Nut5 Länge 30cm
4x extrusion 20x20 I-Typ Nut5 Länge 34cm
6x extrusion 20x20 I-Typ Nut5 Länge 42cm
I allready made the holes for the M5 screws at each end. There are also 100 nut screws in this package, look at the later listing here.
[attachment 12628 06-aluprofil.jpg]
2x 40,50cm 8mm smooth rod cf53
2x 42,00cm 8mm smooth rod cf53
2x 44,50cm 8mm smooth rod cf53
2x threaded rod TR8x1,5 IN103 c15
2x threaded rod nut 8,15 SW 17,15
[attachment 12629 07-wellen.jpg]
A lot of nuts / screws / washers ...
100x screw DIN912 A2 V2a M 5x10
100x screw DIN912 A2 V2a M 5x16
100x screw DIN912 A2 V2a M 5x25
100x screw DIN912 A2 V2a M 3x10
100x washer Din125 A2 M3
100x washer Din125 A2 M5
100x washer Din9021 A2 M3
100x washer Din9021 A2 M6
100x cylinder head bolt with nut Din84 3x20
25x cylinder head bolt with nut Din84 5x30
10x Din125
2x self tapping nut M8
4x nut M8
5x screw M5x50
4x nut M8
1x screw M8x30
1x screw M8x50
...
[attachment 12630 08-schrauben.jpg]
100x nut screw M5 for the extrusion mentioned above
2x 5x8mm CNC Motor Jaw Shaft Coupler 5mm To 8mm
MDF plate 5mm 0,15 x 0,29
MDF plate 5mm 0,25 x 0,29
glas mirrow for the print bead (IKEA Sörli)
2x spring
[attachment 12631 09-sonstiges.jpg]
Stratasys Filament Canister ( [forums.reprap.org] )
[attachment 12632 10-StratasysFilamentCanister.jpg]
I hope I found the correct translations (english isn't my native language) ... if something isn't clear please send me a PM.
I sell the complete package for 650€ (including shipping to germany. contact me for shipping fees to other countries)
greetings
Sven
[brillenflieger.de]
[wir-bauen-einen-3d-drucker.de]
[mendelmax.com]
[techpaladin.com]
Wade Extruder 3mm 9/47 (komplett) I bought from [reprap-fab.org] with 0,5 und 0,35 nozzle
[attachment 12623 01-wadeextruder.jpg]
Plastic set for MendelMax with lower motor mount and RJMP-01-08, also from [reprap-fab.org]
2x tooth belt T5 with Kevlar (90cm X; 120cm Y)
2x Aluminium Pulleys T5/10.
5x ball bearing 608ZZ
12x IGUS RJMP -01-08
[attachment 12624 02-mendelmax-kit.jpg]
1x Mega2560 board rev.3 (100% Arduino-compatible) The mega2560 board is not flashed with any firmware since i don't know which firmware you like to use with it.
1x ramps 1.4
5x A4988 stepper driver
5x heat sink
5x conductive sticker (aluminum)
3x mechanical endstops
1x smart LCD Controller
1x smart adaptor
1x MK2A PCB (still wrapped on the picture)
1x SD Ramps
1x 4GB SD card (genuine Sandisk)
1x 100K ohm EPCOS thermistors
2x cable 50 cm
1x ceramic screwdriver
5x 4 pin cables (motor)
2x 2 pin cables (temperature)
3x 3 pin cables (endstop)
1x 2 pin cables
Single Solid State Relay SSR DC-DC 25A 3-32VDC/5-220VDC
[attachment 12625 03-elektronic.jpg]
5x Nema 17 Stepper motors
[attachment 12626 04-nema17motor.jpg]
240Watt ( 12V/20A ) PSU
[attachment 12627 05-psu.jpg]
4x extrusion 20x20 I-Typ Nut5 Länge 30cm
4x extrusion 20x20 I-Typ Nut5 Länge 34cm
6x extrusion 20x20 I-Typ Nut5 Länge 42cm
I allready made the holes for the M5 screws at each end. There are also 100 nut screws in this package, look at the later listing here.
[attachment 12628 06-aluprofil.jpg]
2x 40,50cm 8mm smooth rod cf53
2x 42,00cm 8mm smooth rod cf53
2x 44,50cm 8mm smooth rod cf53
2x threaded rod TR8x1,5 IN103 c15
2x threaded rod nut 8,15 SW 17,15
[attachment 12629 07-wellen.jpg]
A lot of nuts / screws / washers ...
100x screw DIN912 A2 V2a M 5x10
100x screw DIN912 A2 V2a M 5x16
100x screw DIN912 A2 V2a M 5x25
100x screw DIN912 A2 V2a M 3x10
100x washer Din125 A2 M3
100x washer Din125 A2 M5
100x washer Din9021 A2 M3
100x washer Din9021 A2 M6
100x cylinder head bolt with nut Din84 3x20
25x cylinder head bolt with nut Din84 5x30
10x Din125
2x self tapping nut M8
4x nut M8
5x screw M5x50
4x nut M8
1x screw M8x30
1x screw M8x50
...
[attachment 12630 08-schrauben.jpg]
100x nut screw M5 for the extrusion mentioned above
2x 5x8mm CNC Motor Jaw Shaft Coupler 5mm To 8mm
MDF plate 5mm 0,15 x 0,29
MDF plate 5mm 0,25 x 0,29
glas mirrow for the print bead (IKEA Sörli)
2x spring
[attachment 12631 09-sonstiges.jpg]
Stratasys Filament Canister ( [forums.reprap.org] )
[attachment 12632 10-StratasysFilamentCanister.jpg]
I hope I found the correct translations (english isn't my native language) ... if something isn't clear please send me a PM.
I sell the complete package for 650€ (including shipping to germany. contact me for shipping fees to other countries)
greetings
Sven
↧
↧
[USA (Virginia)] MendelMax1.5 trinitylabs fully assembled kit (no replies)
Summary:
Looking to sell a fully Assembled Trinity Labs MendelMax1.5 kit. I have too many other projects and a baby son who just arrived. I'm looking to brighten some other makers day. I am in the Bristow, Virginia area and looking to sell the kit preferably to someone local where we can exchange in person. I do not have a problem shipping remotely but the cost is likely to be quite expensive.
[EDIT]
I had an inquiry or two about this so I'll add:
The 3dprinter is not operational, as in, I haven't tried to run it. I got it 99% assembled and then my kid showed up and I don't forsee time to do the tuning and tweaking you need to do to get good prints. You'd need to do final pre-flight checks, and configuration, then turn it on, and possibly reconfigure a couple hw pieces(like end stops etc). I am not an experienced 3d printer as this was going to be my first...but I would be absolutely willing to assist you with what knowledge I do have and point you to plenty of the right places to look for information.
Also. This design is made by a guy who left trinitylabs and has his own company now Makerstoolworks. [store.makerstoolworks.com]
The Construction docs are here: [docs.google.com]
[ENDEDIT]
Item:
MendelMax 1.5 Kit Fully Assembled
Item description:
It's the kit that was sold from Trinity Labs
Item Condition:
Brand New -- 99% assembled.
Number Available:
1
Pictures of MendelMax I'm selling:
[s444.beta.photobucket.com]
Video of the MendelMax I'm selling:
[youtu.be]
Price: $700 Hard minimum (OBO above $700 for multiple offers)
(Tax?): No Taxes
Payment Conditions:
Check or Cash. For check I may need more verification.
Location:
Coming from Bristow Virginia
Shipping Cost:
Preferably we can meet in person in Northern Virginia somewhere and make the exchange. I don't mind the opportunity to chat with someone exchange.
Willing to ship anywhere in the USA though cost would likely be prohibitive for buyer.
If shipping is necessary -- Paid for in full on top of offer price by buyer. Seller will contact buyer to negotiate shipping method.
Shipping Conditions:
TBD
Contact Information:
Kyle Stapp
Please email me at RabidCicada@gmail.com or add me on googletalk/chat with the same moniker
Offer Expires:
No expiration.
Trade/Barter:
No Barter.
Direct photo of MendelMax attached.
Looking to sell a fully Assembled Trinity Labs MendelMax1.5 kit. I have too many other projects and a baby son who just arrived. I'm looking to brighten some other makers day. I am in the Bristow, Virginia area and looking to sell the kit preferably to someone local where we can exchange in person. I do not have a problem shipping remotely but the cost is likely to be quite expensive.
[EDIT]
I had an inquiry or two about this so I'll add:
The 3dprinter is not operational, as in, I haven't tried to run it. I got it 99% assembled and then my kid showed up and I don't forsee time to do the tuning and tweaking you need to do to get good prints. You'd need to do final pre-flight checks, and configuration, then turn it on, and possibly reconfigure a couple hw pieces(like end stops etc). I am not an experienced 3d printer as this was going to be my first...but I would be absolutely willing to assist you with what knowledge I do have and point you to plenty of the right places to look for information.
Also. This design is made by a guy who left trinitylabs and has his own company now Makerstoolworks. [store.makerstoolworks.com]
The Construction docs are here: [docs.google.com]
[ENDEDIT]
Item:
MendelMax 1.5 Kit Fully Assembled
Item description:
It's the kit that was sold from Trinity Labs
Item Condition:
Brand New -- 99% assembled.
Number Available:
1
Pictures of MendelMax I'm selling:
[s444.beta.photobucket.com]
Video of the MendelMax I'm selling:
[youtu.be]
Price: $700 Hard minimum (OBO above $700 for multiple offers)
(Tax?): No Taxes
Payment Conditions:
Check or Cash. For check I may need more verification.
Location:
Coming from Bristow Virginia
Shipping Cost:
Preferably we can meet in person in Northern Virginia somewhere and make the exchange. I don't mind the opportunity to chat with someone exchange.
Willing to ship anywhere in the USA though cost would likely be prohibitive for buyer.
If shipping is necessary -- Paid for in full on top of offer price by buyer. Seller will contact buyer to negotiate shipping method.
Shipping Conditions:
TBD
Contact Information:
Kyle Stapp
Please email me at RabidCicada@gmail.com or add me on googletalk/chat with the same moniker
Offer Expires:
No expiration.
Trade/Barter:
No Barter.
Direct photo of MendelMax attached.
↧
1.75mm PLA Filaments are in stock @ 28.50 :) (no replies)
Hello Everyone !!
We are back with the stock of 1.75mm PLA Filament.
Price :- $ 28.50 USD per Kg.
The colors in the stock are as follows :-
For more info visit here
For sales or inquiry Drop a mail at sales@makemendel.com
Thank you ! ! !
We are back with the stock of 1.75mm PLA Filament.
Price :- $ 28.50 USD per Kg.
The colors in the stock are as follows :-
- [*] Blue
[*] Black
[*] White
[*] Yellow
[*] Green
[*] Brown
[*] Red
[*] Grey
[*] Orange
[*] Purple
[*] Gold
[*] Silver
[*] Glowing color
For more info visit here
For sales or inquiry Drop a mail at sales@makemendel.com
Thank you ! ! !
↧
Kapton Tapes are in stock ! ! (no replies)
Hi Everybody,
We have a stock of Kapton tapes with us.
Price for Kapton Tapes are as follows :-
For 15mm*33mm $ 6.99 USD.
For 50mm*33mm $ 14.99 USD.
For more info visit here
For sales and inquiry drop a mail at sales@makemendel.com
Thank you ! ! :)
We have a stock of Kapton tapes with us.
Price for Kapton Tapes are as follows :-
For 15mm*33mm $ 6.99 USD.
For 50mm*33mm $ 14.99 USD.
For more info visit here
For sales and inquiry drop a mail at sales@makemendel.com
Thank you ! ! :)
↧
3D PRINTER AU$200 - eBay Auction !!!!! (1 reply)
↧
↧
Supply3DPLA INT. RATES LOWERED 18-20% (no replies)
We experinced a small problem with our shipping cost calculation regarding Fedex rates. We have now fixed this and the calculations is now aprox 18-24% lower depending on the amount of PLA bought. All people that has payed internaional shipping have been compensated and we hope to have your continued trust.
Best regards // Supply3DPLA
Best regards // Supply3DPLA
↧
[Italia] sell pieces 3d (no replies)
sell pieces in plastic. just send the file. stl for quote. low price 1 € = 10 cm3
↧
plastic parts and more for sale (no replies)
↧
More Pages to Explore .....
