[WorldWide]PiBot Optical Reflection Endstop Rev1.43 - Non-touch Auto-level Sensor (no replies)

www.pibot.com

What is it
Non-touch endstop.

Based on infrared sensor with two fix holes spaced 20mm.

Used to find the datum point( such as x y z (0,0,0)) or keep movement in intended range.

Can be used to supprot non-contact automatic adjustment function of building platform.

Fine-tuning distance.

Trigger by +5V or GND.



How it works
Connect

Connect to the mother controller board via endstop cable



pibot-optical-reflection-endstop

Firmware Configure


More detail please check the tutorials - "Configure Your Firmware".

Set the following 5 parameters：

Probing point1（near the park position）
Probing point2
Probing point3
Distance of senser and extruder in X axis
Distance of senser and extruder in Y axis
one-page-configure-h



Overview

wiring-diagram-for-3d-printer



Assembly for machine.

PiBot Optical Reflection Endstop Rev1.43



Assembly for probing.

PiBot Optical Reflection Endstop Rev1.43



Specification
Length of Reflection Endstop Cable: 600mm
Size of Endstop Board: 40mm × 25mm
Hole Diameter: 3mm
Mounter: 18mm


Shipping List
Reflection Endstop Board × 1


Shipping Notification
World Wide Shiping

DHL: 5 to 9 days
EUB: 10 to 30 days