ABS LG HF380 for sale. I will ship as small as 100grm or as big as xx kg.
It's a high flow, high impact ABS. Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) 43g/10 min (ASTM D1238)
Datasheet : [catalog.ides.com]
Virgin material, in Naturel color, pellets are ovale and around 2 a 3 mm in diameter.
![1210.jpg]( "1210.jpg")
I have been testing it on a self made (Lyman V5 based) Filament extruder and printed with it. For now the maximum extruding speed was 12grm/min (or 1kg in +/- 1h25m ). Lowest filament fluctuation (for the moment) +/- 0.1mm
![proto10.jpg]( "proto10.jpg")
Printed on a Prusa I3 100mm/s 0.1layer (0.35 jhead)
![test_g10.jpg]( "test_g10.jpg")
I'm also testing masterbatches (colors) but will start selling them only when testing is finished.
![1proce12.jpg]( "1proce12.jpg")
![test_111.jpg]( "test_111.jpg")
![prints10.jpg]( "prints10.jpg")
Prices (without shipment costs)
100grm = € 1,-
500grm = € 5,-
1000grm= € 7,50
If you need more, please let me know!
You can ask for shipment cost (or any other question) via PM, that will allow me to find the cheapest one for your zipcode/country.
If you don't have a Filastruder, Filabot, Filafab, Noztek, Filamaker, Lyman or DIY version [www.instructables.com] I can send you some filament I've made. You only pay shipment and packing material costs. Tell me the width you need and I will make it.
It's a high flow, high impact ABS. Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) 43g/10 min (ASTM D1238)
Datasheet : [catalog.ides.com]
Virgin material, in Naturel color, pellets are ovale and around 2 a 3 mm in diameter.
I have been testing it on a self made (Lyman V5 based) Filament extruder and printed with it. For now the maximum extruding speed was 12grm/min (or 1kg in +/- 1h25m ). Lowest filament fluctuation (for the moment) +/- 0.1mm
Printed on a Prusa I3 100mm/s 0.1layer (0.35 jhead)
I'm also testing masterbatches (colors) but will start selling them only when testing is finished.
Prices (without shipment costs)
100grm = € 1,-
500grm = € 5,-
1000grm= € 7,50
If you need more, please let me know!
You can ask for shipment cost (or any other question) via PM, that will allow me to find the cheapest one for your zipcode/country.
If you don't have a Filastruder, Filabot, Filafab, Noztek, Filamaker, Lyman or DIY version [www.instructables.com] I can send you some filament I've made. You only pay shipment and packing material costs. Tell me the width you need and I will make it.
