[attachment 43742 Slide_PROMO_countries_FREE_SHIPPING.jpg]
FREE Shipping for EU countries* Master Kit!! Hurry up and get yours! :) (no replies)
↧
↧
Announcing the brand new xBot! (no replies)
Announcing The Brand New Series
Reprap Austria is proud to announce the brand new printer series xBot.
Providing high quality 3D-printing-systems for the masses, with fully assembled machines.
Easy to use - for everyone!
![_MG_2770.jpg]( "_MG_2770.jpg")
![xBot_gross_edit.jpg]( "xBot_gross_edit.jpg")
Featherlight where needed...
By reducing the overall weight of all moving parts, the system gains precise positioning at high printing speeds. For example: the typical 180 degrees printhead movements at solid infill layers are mastered without vibrations at high acceleration settings.
The result is smooth movement and minimized movement artifacts in complex geometry prints.
The strong 2,5 A Nema 17 Motors run far from their limits.
Heavy-Duty where needed...
The ultra-heavy-duty aluminium mainframe, made from 3 mm lasered aluminium sheets (2,5 kg of aluminium xBot 150 and 3,5 kg xBot 320) withstands mechanical peak loads with ease.
A rigid and torsion resistant frame is an essential requirement for high precision positioning.
X, Y... then there is Z left...
When it comes to quality at high layer-resolutions the printing bed design is crucial.
Your prints will find a rock solid place to start with the new xBot series. Keeping it lightweight, but still stiff and rigid led to the new dual-layer-design.
Guided by high quality flanged linear ball bearings the dual layer bed design provides consistent Z-layers, leaving Z-artifacts no chance.
Overall 6 mm of machine-grade-aluminium gives the new bed its strength and a convenient 3-point leveling with knurled-head screws ensures fast and easy bed leveling.
High precision Bowden Extruder Setup
We started from the scratch.
The formula: reduction of unguided filament sections to a minimum.
An additional benefit of short unguided filament approach is an autoloader capability of the extrusion mechanics.
Fast filament changes without tinkering!
But precise hotends need a powerful filament drive.
The heart piece is a 1:5 geared NEMA 17 motor. The planetary gear provides high torque and extreme precision of about 2 µm at the hobbed bolt. To transfer those huge amounts of torque the new xBot series is equipped with a very sharp cut brass hobbed bolt.
Have a look on our new shop, www.reprap.cc
Reprap Austria is proud to announce the brand new printer series xBot.
Providing high quality 3D-printing-systems for the masses, with fully assembled machines.
Easy to use - for everyone!
Featherlight where needed...
By reducing the overall weight of all moving parts, the system gains precise positioning at high printing speeds. For example: the typical 180 degrees printhead movements at solid infill layers are mastered without vibrations at high acceleration settings.
The result is smooth movement and minimized movement artifacts in complex geometry prints.
The strong 2,5 A Nema 17 Motors run far from their limits.
Heavy-Duty where needed...
The ultra-heavy-duty aluminium mainframe, made from 3 mm lasered aluminium sheets (2,5 kg of aluminium xBot 150 and 3,5 kg xBot 320) withstands mechanical peak loads with ease.
A rigid and torsion resistant frame is an essential requirement for high precision positioning.
X, Y... then there is Z left...
When it comes to quality at high layer-resolutions the printing bed design is crucial.
Your prints will find a rock solid place to start with the new xBot series. Keeping it lightweight, but still stiff and rigid led to the new dual-layer-design.
Guided by high quality flanged linear ball bearings the dual layer bed design provides consistent Z-layers, leaving Z-artifacts no chance.
Overall 6 mm of machine-grade-aluminium gives the new bed its strength and a convenient 3-point leveling with knurled-head screws ensures fast and easy bed leveling.
High precision Bowden Extruder Setup
We started from the scratch.
The formula: reduction of unguided filament sections to a minimum.
An additional benefit of short unguided filament approach is an autoloader capability of the extrusion mechanics.
Fast filament changes without tinkering!
But precise hotends need a powerful filament drive.
The heart piece is a 1:5 geared NEMA 17 motor. The planetary gear provides high torque and extreme precision of about 2 µm at the hobbed bolt. To transfer those huge amounts of torque the new xBot series is equipped with a very sharp cut brass hobbed bolt.
Have a look on our new shop, www.reprap.cc
↧
(EU) Doodle 3D printer WiFI Adapter + Ease of Use Enhancement (no replies)
Selling new, unused and unopened Doodle3D WiFi box, that will allow wireless use of your 3D printer, and also easy creating of 3D objects from any browser (ideal for kids - LEG.O bricks, and letters available from templates...)... Bought from kickstarted, but sold 3d printer before it arrived.
more info on: [www.doodle3d.com]
Price: 67€ , includes shipping to EU. Payment with paypal, or bitcoin or darkcoin (www.darkcoin.io).
Or if you have trust issues, feel free to buy via ebay: [www.ebay.ie]
-Jaka
----
What is Doodle3D WiFi Box?
The Doodle3D WiFi Box is a WiFi device connecting your iPad/iPhone/laptop or other devices to your 3D printer. Simply connect the 3D printer (see the list of supported printers on ourfeatures page) to the USB port of the Doodle3D WiFi-Box, connect to the WiFi network and start sketching and printing in 3D.
The Doodle3D software runs on the device itself. Just connect to it through your browser. Make a sketch, change it to a 3D shape through the user-friendly interface and simply press Print. Your 3D printer will immediately start printing your Doodle3D design.
If you don’t have a 3D printer yourself yet you can take your Doodle3D WiFi Box and hook it up to a friend’s or Fablab or Makerspace 3D printer and start printing as soon as you finish designing your doodle. No need to install any software applications or programs!Features
Doodle3D WiFi Box
The Doodle3D WiFi Box is a WiFi device connecting your iPad/iPhone/laptop or other devices to your 3D printer. Simply connect the 3D printer (see the list of supported printers below) to the USB port of the Doodle3D WiFi-Box, connect to the WiFi network and start sketching and printing in 3D.
Doodle3D box #1
The Doodle3D software runs on the device itself. Just connect to it through your browser. Make a sketch, change it to a 3D shape through the user-friendly interface and simply press Print. Your 3D printer will immediately start printing your Doodle3D design.
If you don’t have a 3D printer yourself yet you can take your Doodle3D WiFi Box and hook it up to a friend’s or Fablab or Makerspace 3D printer and start printing as soon as you finish designing your doodle. No need to install any software applications or programs!
Buy the Doodle3D WiFi Box here.
Doodle3D allows you to create:
Hand drawn 3D printed illustrations
Characters, creatures, tabletop-props
Decorative art, make doodles for your Christmas tree come december!
Patterns, stencils, logo’s
Go creative and design a bunch of your own alphabet letters or print a full font.
And much more, it is up to you!
Meet our Doodle3D cat
Meet our Doodle3D cat
Doodle3D compatibility
The Doodle3D WiFi Box aims to connect any wireless drawing device to any 3D printer. We will try to support as many different drawing devices (computers, laptops, tablets, smartphones) as well as many different 3D printers.
Which devices we manage to support depends on how open their format is. If you have an open-source 3D printer we’re almost sure we can support your printer since we can find out how to communicate with it. If you own a commercial closed source printer it might be more difficult.
Printers supported so far by the Doodle3D WiFi Box:
Ultimaker
Ultimaker2
Builder 3D
Bukobot
Cartesio Cyrus
Delta RostockMax
Deltamaker
EventorBot
Felix
Gigabot
Kossel
LeapFrog Creatr
LulzBot AO-101
MakerBot Replicator
MakerBot Replicator2
MakerBot Replicator2X
MakerBot Thing-o-matic
MakerGear M2
MakerGear Prusa
Makibox
Orca 0.3
ORD Bot Hadron
Printrbot
Printxel 3D
Prusa I3
Prusa Iteration 2
RepRapPro Huxley
RepRapPro Mendel
Rigidbot
RoBo 3D Printer
ShaperCube
Tantillus
Vision 3D Printer
bq Witbox
Wanhao Duplicator 4
Doodle3D - almost any open-source printer will be supported
Doodle3D – almost any open-source printer will be supported
Please inform your 3D printer’s manufacturer and other 3D printer users on forums and mailinglists and tell everyone about the great potential of the Doodle3D WiFi Box.
We need to acquire/borrow, test and develop for any device we want to get compatible with, and support them in the future. We ware constantly increasing Doodle3D’s WiFi-Box compatibility with more types of printers and devices. Please help us by sharing your knowledge and experiences!
Doodle3D stretch goals
Word Art implemented
Scan & Trace under development
After exceeding our initial goal on Kickstarter we announced some stretch goals. These goals include new features and new applications to be used in combination with the Doodle3D WiFi Box. Some of these stretchgoals we reached and we will apply those features in the WiFi-Box.
See detailed info about our stretchgoals in the update section on our Kickstarter page.
goal 50k (goal reached) - EXTRA - Apart from printing your doodles, the Doodle3D WiFi Box will also be able to wirelessly 3D print more complex 3D models by streaming GCODE to your printer. You can also monitor your printer's speed, temperature, progress
Apart from printing your doodles, the Doodle3D WiFi Box will also be able to wirelessly 3D print more complex 3D models by streaming GCODE to your printer. You can also monitor your printer’s speed, temperature, progress
Stretchgoal 60k (goal reached!) - Scan & Trace, use you device's camera to make a photo of an image/logo/text and directly 3D print it!
We reached the 60k stretchgoal which means we will develop the Scan & Trace feature for Doodle3D: use you device’s camera to make a photo of an image/logo/text and directly 3D print it!
Stretchgoal 75k - 3D print WordArt with Doodle3D
stretchgoal 75k (heading towards) - Create WordArt with Doodle3D
We almost reached the 75k stretchgoal which was 3D printing WordArt with Doodle3D. Because we were so close we decided we will implement this feature after finishing the core functionality.
more info on: [www.doodle3d.com]
Price: 67€ , includes shipping to EU. Payment with paypal, or bitcoin or darkcoin (www.darkcoin.io).
Or if you have trust issues, feel free to buy via ebay: [www.ebay.ie]
-Jaka
----
What is Doodle3D WiFi Box?
The Doodle3D WiFi Box is a WiFi device connecting your iPad/iPhone/laptop or other devices to your 3D printer. Simply connect the 3D printer (see the list of supported printers on ourfeatures page) to the USB port of the Doodle3D WiFi-Box, connect to the WiFi network and start sketching and printing in 3D.
The Doodle3D software runs on the device itself. Just connect to it through your browser. Make a sketch, change it to a 3D shape through the user-friendly interface and simply press Print. Your 3D printer will immediately start printing your Doodle3D design.
If you don’t have a 3D printer yourself yet you can take your Doodle3D WiFi Box and hook it up to a friend’s or Fablab or Makerspace 3D printer and start printing as soon as you finish designing your doodle. No need to install any software applications or programs!Features
Doodle3D WiFi Box
The Doodle3D WiFi Box is a WiFi device connecting your iPad/iPhone/laptop or other devices to your 3D printer. Simply connect the 3D printer (see the list of supported printers below) to the USB port of the Doodle3D WiFi-Box, connect to the WiFi network and start sketching and printing in 3D.
Doodle3D box #1
The Doodle3D software runs on the device itself. Just connect to it through your browser. Make a sketch, change it to a 3D shape through the user-friendly interface and simply press Print. Your 3D printer will immediately start printing your Doodle3D design.
If you don’t have a 3D printer yourself yet you can take your Doodle3D WiFi Box and hook it up to a friend’s or Fablab or Makerspace 3D printer and start printing as soon as you finish designing your doodle. No need to install any software applications or programs!
Buy the Doodle3D WiFi Box here.
Doodle3D allows you to create:
Hand drawn 3D printed illustrations
Characters, creatures, tabletop-props
Decorative art, make doodles for your Christmas tree come december!
Patterns, stencils, logo’s
Go creative and design a bunch of your own alphabet letters or print a full font.
And much more, it is up to you!
Meet our Doodle3D cat
Meet our Doodle3D cat
Doodle3D compatibility
The Doodle3D WiFi Box aims to connect any wireless drawing device to any 3D printer. We will try to support as many different drawing devices (computers, laptops, tablets, smartphones) as well as many different 3D printers.
Which devices we manage to support depends on how open their format is. If you have an open-source 3D printer we’re almost sure we can support your printer since we can find out how to communicate with it. If you own a commercial closed source printer it might be more difficult.
Printers supported so far by the Doodle3D WiFi Box:
Ultimaker
Ultimaker2
Builder 3D
Bukobot
Cartesio Cyrus
Delta RostockMax
Deltamaker
EventorBot
Felix
Gigabot
Kossel
LeapFrog Creatr
LulzBot AO-101
MakerBot Replicator
MakerBot Replicator2
MakerBot Replicator2X
MakerBot Thing-o-matic
MakerGear M2
MakerGear Prusa
Makibox
Orca 0.3
ORD Bot Hadron
Printrbot
Printxel 3D
Prusa I3
Prusa Iteration 2
RepRapPro Huxley
RepRapPro Mendel
Rigidbot
RoBo 3D Printer
ShaperCube
Tantillus
Vision 3D Printer
bq Witbox
Wanhao Duplicator 4
Doodle3D - almost any open-source printer will be supported
Doodle3D – almost any open-source printer will be supported
Please inform your 3D printer’s manufacturer and other 3D printer users on forums and mailinglists and tell everyone about the great potential of the Doodle3D WiFi Box.
We need to acquire/borrow, test and develop for any device we want to get compatible with, and support them in the future. We ware constantly increasing Doodle3D’s WiFi-Box compatibility with more types of printers and devices. Please help us by sharing your knowledge and experiences!
Doodle3D stretch goals
Word Art implemented
Scan & Trace under development
After exceeding our initial goal on Kickstarter we announced some stretch goals. These goals include new features and new applications to be used in combination with the Doodle3D WiFi Box. Some of these stretchgoals we reached and we will apply those features in the WiFi-Box.
See detailed info about our stretchgoals in the update section on our Kickstarter page.
goal 50k (goal reached) - EXTRA - Apart from printing your doodles, the Doodle3D WiFi Box will also be able to wirelessly 3D print more complex 3D models by streaming GCODE to your printer. You can also monitor your printer's speed, temperature, progress
Apart from printing your doodles, the Doodle3D WiFi Box will also be able to wirelessly 3D print more complex 3D models by streaming GCODE to your printer. You can also monitor your printer’s speed, temperature, progress
Stretchgoal 60k (goal reached!) - Scan & Trace, use you device's camera to make a photo of an image/logo/text and directly 3D print it!
We reached the 60k stretchgoal which means we will develop the Scan & Trace feature for Doodle3D: use you device’s camera to make a photo of an image/logo/text and directly 3D print it!
Stretchgoal 75k - 3D print WordArt with Doodle3D
stretchgoal 75k (heading towards) - Create WordArt with Doodle3D
We almost reached the 75k stretchgoal which was 3D printing WordArt with Doodle3D. Because we were so close we decided we will implement this feature after finishing the core functionality.
↧
[Worldwide] PlusBot Assembled 3D PrinterX( (no replies)
Hello EveryOne,
Now, PlusBot 3D Printer available in Black Color...which looking awesome...8-)
ready stock available @ $ 899 USD each + $ 150 Shipping charge by DHL Express world wide.
![img-20141117-wa0005.jpg]( "img-20141117-wa0005.jpg")
![img-20141117-wa0007.jpg]( "img-20141117-wa0007.jpg")
![img-20141117-wa0008.jpg]( "img-20141117-wa0008.jpg")
![img-20141117-wa0006.jpg]( "img-20141117-wa0006.jpg")
For more information visit : [makemendel.com]
Or any query send mail us at : support@makemendel,com
Thanks in advance ...X(
Now, PlusBot 3D Printer available in Black Color...which looking awesome...8-)
ready stock available @ $ 899 USD each + $ 150 Shipping charge by DHL Express world wide.
For more information visit : [makemendel.com]
Or any query send mail us at : support@makemendel,com
Thanks in advance ...X(
↧
Schufco Prusa i3 kit €399 (tu) (no replies)
↧
↧
Cheap Filament (no replies)
This is Tommy, from FoxSmart.club. We're a new entry into filament, though I've been involved in the Maker community for several years.
We sell 1kg PLA filament for $18 a roll with $4 flat shipping. Our filament is crazy consistent (per reviewers) and is very high quality. If you have any questions about it - just ping me directly. Cheers! Tommy
We sell 1kg PLA filament for $18 a roll with $4 flat shipping. Our filament is crazy consistent (per reviewers) and is very high quality. If you have any questions about it - just ping me directly. Cheers! Tommy
↧
prusa i3 3d priner kitX(X( (no replies)
he3d-i3 prusa i3 3d priner kit
Promotion $299 today!if you first payment and you first get it!
The print size: 200 * 200 * 200 mm
![he3d-i3.jpg]( "he3d-i3.jpg")
Promotion $299 today!if you first payment and you first get it!
The print size: 200 * 200 * 200 mm
↧
High Consistency 3D Filament (Made in Taiwan) (no replies)
Are you looking for consistency in your filament?
...Solution to clogged nozzle?
...Uneven surface on your printed model?
If you had calibrated your 3D printer with experts here, but still having troubles with your prints quality.
We can help.
BotFeeder Filament
...Solution to clogged nozzle?
...Uneven surface on your printed model?
If you had calibrated your 3D printer with experts here, but still having troubles with your prints quality.
We can help.
BotFeeder Filament
↧
[Portugal + Europe] ABS filament and pellets (no replies)
We produce high quality ABS filament, packaged on ecological spools.
We also sell ABS pellets suitable for Filastruder, Layman, etc. DIY extruders.
Accepting resellers.
Please checkout www.dowire.pt
↧
↧
[INTERNATIONAL] KOSSEL MINI 3D PRINTER KIT $599USD ONLY!!! (no replies)
This is a complete Kossel Mini 3D Printer kit. Buy now from http://www.blomker.com
Kossel Mini Assembly Guide :
http://blomker.com/Kossel_Mini_Assembly_Guide_V1.0.pdf
Content :
Frame :
Openbeam 15x15 Anodized Black Extrusions (240mm length - 9pcs)
Openbeam 15x15 Anodized Black Extrusions (600mm length - 3pcs)
180mm round glass, 3mm thick
For linear motion on the 3 towers :
HiWin Compatible MGN-12H Linear Rail 400mm (3sets)
GT2 Aluminium Pulley, 16 teeth (3pcs)
GT2 Open End Belt (4 meter)
NEMA 17 Stepper Motors (4 pcs)
F623ZZ Flanged Bearing for Belt Idler (6pcs)
Bowden Extruder :
PTFE Tube for bowden extruder 4mm OD, 2mm ID (550mm length)
Push fit connectors (2 pcs)
1.75mm Hot End (with 30mm fan)
625ZZ Bearing for Extruder Idler (1pc)
Electronics :
12V 5A Power Supply
RAMPS 1.4 Electronics (LCD Controller NOT included)
Endstop Microswitch (4pcs)
Endstop wiring (4 sets)
Diagonal Push Rods :
Traxxas #5347 (1pack = 12pcs)
Carbon Fiber Tubes, 6mm OD, 4mm ID, 180mm L (6pcs)
Bolts and Nuts :
M5 x 20mm Cap Screw 1pc
M5 Nut 1pc
M3 x 8mm Cap Screw 130pcs
M3 x 16mm Cap Screw 13pcs
M3 x 20mm Cap Screw 10pcs
M3 x 25mm Cap Screw 10pcs
M3 x 35mm Cap Screw 5pcs
M3 Nut 130pcs
M3 Nyloc Nut 12pcs
M3 Washer 20pcs
M2.5x 12mm Cap Screw 10pcs
M4 Set Screw 20mm 15pcs
Items for auto level probe :
- 1pc Spring (0.4mm wire diameter, 23.5mm length)
- 1pc 1.5mm Allen Key
- 1pc Terminal Block with 2 screws
Kossel Mini Printed Parts :
- 6pcs Endstop Holders
- 3pcs Vertical Carriage
- 3pcs Bottom Vertex
- 3pcs Top Vertex
- 1pc Effector
- 1pc Extruder (thingiverse.com/thing:215010)
- 1pc Extruder Holder
- 1pc Auto Leveling Probe Holder
![kossel-2_zps7e6f75c4.jpg]( "kossel-2_zps7e6f75c4.jpg")
![Kossel_Mini_Kit-10_zps69c55b9d.jpg]( "Kossel_Mini_Kit-10_zps69c55b9d.jpg")
![Kossel_Mini_Kit-02_zps5aceb0c9.jpg]( "Kossel_Mini_Kit-02_zps5aceb0c9.jpg")
![Kossel_Mini_Kit-37_zps36526ce4.jpg]( "Kossel_Mini_Kit-37_zps36526ce4.jpg")
![Kossel_Mini_Kit-34_zps62482bc2.jpg]( "Kossel_Mini_Kit-34_zps62482bc2.jpg")
http://www.blomker.com
Kossel Mini Assembly Guide :
http://blomker.com/Kossel_Mini_Assembly_Guide_V1.0.pdf
Content :
Frame :
Openbeam 15x15 Anodized Black Extrusions (240mm length - 9pcs)
Openbeam 15x15 Anodized Black Extrusions (600mm length - 3pcs)
180mm round glass, 3mm thick
For linear motion on the 3 towers :
HiWin Compatible MGN-12H Linear Rail 400mm (3sets)
GT2 Aluminium Pulley, 16 teeth (3pcs)
GT2 Open End Belt (4 meter)
NEMA 17 Stepper Motors (4 pcs)
F623ZZ Flanged Bearing for Belt Idler (6pcs)
Bowden Extruder :
PTFE Tube for bowden extruder 4mm OD, 2mm ID (550mm length)
Push fit connectors (2 pcs)
1.75mm Hot End (with 30mm fan)
625ZZ Bearing for Extruder Idler (1pc)
Electronics :
12V 5A Power Supply
RAMPS 1.4 Electronics (LCD Controller NOT included)
Endstop Microswitch (4pcs)
Endstop wiring (4 sets)
Diagonal Push Rods :
Traxxas #5347 (1pack = 12pcs)
Carbon Fiber Tubes, 6mm OD, 4mm ID, 180mm L (6pcs)
Bolts and Nuts :
M5 x 20mm Cap Screw 1pc
M5 Nut 1pc
M3 x 8mm Cap Screw 130pcs
M3 x 16mm Cap Screw 13pcs
M3 x 20mm Cap Screw 10pcs
M3 x 25mm Cap Screw 10pcs
M3 x 35mm Cap Screw 5pcs
M3 Nut 130pcs
M3 Nyloc Nut 12pcs
M3 Washer 20pcs
M2.5x 12mm Cap Screw 10pcs
M4 Set Screw 20mm 15pcs
Items for auto level probe :
- 1pc Spring (0.4mm wire diameter, 23.5mm length)
- 1pc 1.5mm Allen Key
- 1pc Terminal Block with 2 screws
Kossel Mini Printed Parts :
- 6pcs Endstop Holders
- 3pcs Vertical Carriage
- 3pcs Bottom Vertex
- 3pcs Top Vertex
- 1pc Effector
- 1pc Extruder (thingiverse.com/thing:215010)
- 1pc Extruder Holder
- 1pc Auto Leveling Probe Holder
http://www.blomker.com
↧
[RRW] PLA/ABS 16.49/kg! (no replies)
New stock of filament just in, check [reprapworld.com]
↧
Pololu Robotics and Electronics Black Friday/Cyber Monday Sale 2014 (no replies)
Hello, everyone!
Pololu Robotics and Electronics is having its biggest Black Friday/Cyber Monday sale yet, offering huge discounts on over 600 products, along with 11% to 15% off orders over $100! Save big on robots, programmable controllers (including A-Stars, Arduinos, Raspberry Pis, and mbeds), sensors, motor drivers, power supplies, LEDs, actuators, wheels, breadboards, wires, and more. The first doorbuster deals go live Wednesday, November 26, and the sale runs through Cyber Monday (December 1).
On top of recently substantially reducing prices on our stepper motors and adding assembled/bulk options, the sale discounts our popular stepper motor drivers even further. Some stepper motors and our stepper motor bracket will be on sale.
For details, visit
http://www.pololu.com/blackfriday2014
Ryan
↧
A NEW ROSOTCK MINI OR KOSSEL DELTA (no replies)
HELLO,
Everyone.
I am wandering and looking for a DELTA printer. maybe ROSTOCK or KOSSEL.
i have a prusa i3 already. and i want to have a delta printer. i searched in the internet, it seems that delta printer is much faster than prusa printer.
Do you have a recommend?
I brought a prusa i3 from www.3dminions.com. They sell DELTA printer too. But do you have another printer. I need more options.
Thank you.
Everyone.
I am wandering and looking for a DELTA printer. maybe ROSTOCK or KOSSEL.
i have a prusa i3 already. and i want to have a delta printer. i searched in the internet, it seems that delta printer is much faster than prusa printer.
Do you have a recommend?
I brought a prusa i3 from www.3dminions.com. They sell DELTA printer too. But do you have another printer. I need more options.
Thank you.
↧
↧
Cheapest prusa i3 3d printer kit (no replies)
Cheapest prusa i3 3d printer kit. LCD Control Panel. Print Size: 200 * 200 * 180 mm, works with ABS, PLA Only $294 USD
[www.3dprintersonlinestore.com]
[attachment 44220 he3di31.jpg]
[www.3dprintersonlinestore.com]
[attachment 44220 he3di31.jpg]
↧
On Sale Reprap Prusa i3 3D Printer DIY KIT with 1kg filaments free [Optional] Ramps1.4 LCD &Photoelectric Limited Switch (1 reply)
Super configuration, specialized export , own factory, accept OEM/ODM
Specification[/size]
Tech print[/color]: FDM (Fused Deposition Modeling)
Print size: 200*200*180mm
Max resolution/height accuracy: 0.1mm-0.4mm
XY axis positioning accuracy: 0.012mm
Nozzle diameter:0.4mm
Input voltage：100V-240V
Working voltage:12V
Size:
Machine dimension:450*460*360mm
Package dimension:470*470*330mm
Export dimension:480*480*270mm
Product weight: 7.8kg
Packing weight: 9.8kg
Hardware Configuration
Subject Structure: acrylic laser cutting device
XY axis drive: 45# carbon steel optical axis
Z axis drive: integrated four wire screw motor
Stepper motor：step angle 1.8 degree, 47mm motor
Extruder： newest upgrading MK8 double cooling technique
Software：
Compatible software: Cura, Slic3r
File format: STL, G-code
OS: Windows XP, Windows 7, Mac OS X
Printing Consumables
Printing Material : PLA/ ABS
Material Diameter: 1.75mm
Color: over 10 colors or custom-made color
i3 three features
Standard Industrial-strength：With MK8 extruder,you cost a toy but gain the super accuracy no less high-end import printer.
No Plugging: 0.4mm electroplating work with polishing&grinding, the nozzle temperature far more stable than ever before
Adjustable printing speed: debugging the printing speed at any time even to 200% speed.
Well-designed by Shenzhen Eternal Feat Co.,Ltd engineers, Migbot i3, the only core accessories, using industrial equipment with reasonable price, compared with DIY printer on the market. Every detail being strictly selected, making sure I3 posses high efficiency and stable performance.
acrylic surface
Thickened acrylic laser cutting device made Migbot I3 more stable when running in high speed. Well-formed appearance, custom-made color is your optimal choice.
main board
Customized by domestic famous main board factory in melzi 2.0 version, our main control IC takes brandy new original ATMEGA1284 with G code TF card slot. It is the best choice to print offline without additional LCD.
motor
47mm lengthen stepping motor with 1.8 degree step angle, larger torque than 40mm and 33mm motor, ensure right running with high speed synchronously.
optic axis & screw
As abrasive resistance and smooth it is,optic axis takes 45# carbon steel harden with quenching process.
Four-wire T-type screw, special-made in large manufactory by Changzhou, Jiangsu province , guarantee the precision of X axis drive.
:)-DPrinting Platform
The upgrading heating platform balanced the heating surface. Meanwhile, anodizing surface producing tough protective layer on the aluminum alloy, strengthen the abrasive resistance and working life extraordinarily.
Bearing& Belt
Stability far more than common bearing with ribbon, Migbot i3 adopts SC8UU and lengthen SC8LUU linear bearings which make our products super quality in the details.
(:P)Common Products on the market
√ Industrial-strength MK8 extruder, dual radiator fans, special processing nozzle inwall without plugging.
× Single fan + one straight pipe with nozzle = simple structure
√ $3 SC8LUU linear bearing on X, Y axis drive, Migbot i3 increases the accuracy of location greatly through anodizing.
× Only $0.3 bearing + $0.001 bandages. Just can do if you bind tightly.
√ Special-made four-wire T-type screw drive ＋0.1mm range location accuracy. Just two Z axises cost more than $30. Any cheaper supplier, please contact us~!
× Common Z axis screw($1.2) + coupling drive=unstable quality products. Anyone who wants the cheaper screw, contact us,too！
√ Original Omron EE-SP X403 made in Japan , more precision than ever before.
× ordinary touching limit switch = slight movement + adjust the height of the platform frequently.
(tu)Why Choose Us?
1.Direct manufactory supply
The biggest professional 3D printer factory in Shenzhen, providing various rapid prototyping of 3D printing programs. We supply original owner service like OEM/ODM.
We are always here waiting for your coming no matter you want retailing or wholesaling, domestic sale or foreign trade, bidding or OEM~!
2. Full-scale after-sale service
Returns on unused items within 7 days
Free replacement during warranty within 6 months
Free technique maintenance within 3 years
Technical consultation life-long
3、Considerate pre-sale service
We sincerely invite you to visit our factory and learn basic training. Or we can print products you send beforehand. What’s more? We provide full-scale after-sale technical service and training service to our agents!
24-hour service hotline: 400 650 3501
Address:East Zone No.1, Shangxue Industrial Area, Longgang District, Shenzhen City, China.
Tel:+86-0755-66605832, 18507553919
Email:alisadong0316@gmail.com
Skype:migbot-alisa
[/s][/s][/sup]
↧
Blue LED Light Cured Photopolymer Cures With Standard LED Pico and Pocket Projectors (no replies)
New ZVE200-V470 photopolymer that is sensitive enough to cure with the blue light from unmodified Pico and Pocket sized LED projectors.
ZVE200-v470 Cures by UV and visible blue led light up to 470nm. Lower cost printers using Pico or pocket LED projectors are now possible.
ZVE200-v470 Cures by UV and visible blue led light up to 470nm. Lower cost printers using Pico or pocket LED projectors are now possible.
↧
Black weekend sale is active on www.intservo.com 30% off all PLA/ABS (no replies)
Premium eSUN brand. Promotion is active now till end of Cyber Monday.
Promotion details can be found in below link: INTSERVO BLACK FRIDAY
By default, we will include a PETG 40 feet sample (1.75mm) to your order on our website. You can also choose other specialty samples mentioned in above link and some have 3mm version available. PETG filament is eSUN's latest innovation. Feedback has been very positive from early customers. You can google esun petg to find specs, discussions etc.
Thanks!
William at INTSERVO
Promotion details can be found in below link: INTSERVO BLACK FRIDAY
By default, we will include a PETG 40 feet sample (1.75mm) to your order on our website. You can also choose other specialty samples mentioned in above link and some have 3mm version available. PETG filament is eSUN's latest innovation. Feedback has been very positive from early customers. You can google esun petg to find specs, discussions etc.
Thanks!
William at INTSERVO
↧
↧
X([USA] RepRap Prusa I3 Rework Printed Parts Set! BLUEX( (no replies)
I am selling a Prusa I3 Rework set of BLUE PLA printed parts. I have also included the extruder body in white ABS. These parts are printed at high quality and 0.2mm layer height, 50% infill. Check it out!
[www.ebay.com]
Need something else printed? Check out my Hub! I will give you a quote.
![logo-heart-white-gradient-30px.png?hubid=30445]()
3D Print
[www.ebay.com]
Need something else printed? Check out my Hub! I will give you a quote.
3D Print
↧
(GERMANY & worldwide) 10% discount during Black Friday on cubic-print.com (tu) (no replies)
Dear reprap community,
feel free to check out our Black Friday special.
Only on 28th of November: 10% discount on everything.
www.cubic-print.com
Happy printing,
your cubic-print team
feel free to check out our Black Friday special.
Only on 28th of November: 10% discount on everything.
www.cubic-print.com
Happy printing,
your cubic-print team
↧
[CANADA] 15% Discount on all 3MM filaments from NOW to Monday!!! (no replies)
15% Discount on all 3MM Filament from NOW to Monday!!!
ABS, PLA, SmartABS, Laybrick, Colorfabb (PLA/PHA, Woodfill, Glowfill) Bendlay, NinjaFlex, Taulman3D (Nylon's, T-GLASE), Airwolf 3D (ABS, Polycarbonate), HiPS and PVA
Use DISCOUNT CODE : 3MM-CYBER-BLACK-WE
[www.voxelfactory.com]
ABS, PLA, SmartABS, Laybrick, Colorfabb (PLA/PHA, Woodfill, Glowfill) Bendlay, NinjaFlex, Taulman3D (Nylon's, T-GLASE), Airwolf 3D (ABS, Polycarbonate), HiPS and PVA
Use DISCOUNT CODE : 3MM-CYBER-BLACK-WE
[www.voxelfactory.com]
↧
